Home > MotionHeat > Heated Gloves >

MOTIONHeat - Complete Set
Best Heated Gloves | Calgary  | Edmonton | Vancouver | Winnipeg | Onatrio | Quebec | Canada
 
Alternative Views:


Complete Set package contains,
- Pair of glove liner.
- 2 Battery you choose.
- One Battery Charger.
- One StickMan wire.
Our Price: $235.95


Availability:: Usually Ships in 2 to 3 Business Days


Battery Voltage:


Car Charger:


Glove Size*:


Vehicle Power Adapter:


Include F-F Jacket adapter:


Qty:  
Description Technical Specs FAQ & Return Policy
 
Two batteries and one charger system - The ability to run the liners with the batteries in the cuff or using the Stickman wireset included so the weight of the batteries can be moved to a inside jacket pocket.


NOTE: 16v batteries do not fit inside the pocket and must be used with the stickman wire included in the package.

Size Chart

Hand measurement sizes (circumference): 



Size Centimeters   Inches
X-SMALL 16 - 18cm  6" - 7" 
SMALL  18 - 21cm   7" - 8" 
MEDIUM  21 - 23cm 8" - 9" 
LARGE  23 - 25cm  9" - 10"
X-LARGE 25 - 28cm  10" - 11"

 

If your size measurements fall between two size categories we recommend going a size down for optimal fitting.

 






12v Standard 2.6Ah
Heat Setting
12v Compact 900mAh
3.00 Hours
HIGH
0.80 Hours
5.25 Hours
MEDIUM
1.10 Hours
8.00 Hours
LOW
2.40 Hours
Run Time

This is our 4th Generation MOTIONHeat Glove liners.

Using a carbon fiber heating element around perimeter of the glove, the liner provides heat to all 4 fingers and your thumb. The heat can be felt almost instantaneously when the gloves are turned on because of form fitting stretch of our polyester/Lycra material. Designed as a cycling liner, we also have a small patch of the heating element above the knuckles where it gets cold as you are riding through cold weather.

New for the 4th Gen gloves is the addition a cuff to hold our 12v 2.6ah battery. We also added a one touch silicon button for temperature control based on the feedback we received on our last batch of gloves. The gloves still can be run with our Stickman wireset through a jacket so the battery weight can be moved off the wrist, but on request the cuff was added so the gloves can be run of an individual battery in the cuff. Now you don't need to worry about disconnecting your glove from the wire when removing the liner or moving around for everyday tasks.

Temperature control was highly requested based on the feed back on the gloves from last year, so we incorporated the same button from our heated vests to the MOTIONHeat glove liners. You can now turn the gloves on and off by holding the button for 2 seconds. While the gloves are on, you have high, medium and low setting for the temperature.

The Low setting is closest to normal body heat at 30C and will give you a run time of 8 hrs.
The Medium setting at 40C is what most people would find warm and gives a run time of 5 hrs.
The High setting comes in at a toasty 50C that feels like your hands are next to a campfire and will run for 3 hrs.

Outdoor users of MotionHeat Products

Features
    • Instant Heat using woven carbon fiber heating elements
    • Full finger coverage as the heating element is around the perimeter of the glove
    • One touch variable temperature control
    • Ability to the mount the batteries in the glove or elsewhere

    Return/Exchange and Warranty Information

    All MotionHeat products, including glove liners, batteries, chargers, wire sets, and other accessories, come with a one-year warranty from the date of purchase. The warranty applies to manufacturer's defects and does not cover negligence or improper use on the part of the customer. Things that are NOT covered under the warranty include (but are not limited to): damage resulting from using the glove liner without a protective shell, damage resulting from submerging the glove liner in water or other liquids, and damage resulting from customer-attempted alterations or repairs.

    All MotionHeat products may be exchanged for a different size or returned for a full refund within the first 60 days after the customer receives the product, provided that all components are in new condition and THE CARDBOARD TAG IS STILL ATTACHED TO THE GLOVE LINERS. No returns or exchanges will be accepted for gloves which have had their cardboard tag removed.

    Return policy detail link
    http://itselectric.ca/rma


Average Customer Review: 4 of 5 Total Reviews: 8 Write a review.

  0 of 1 people found this review helpful:
 
Stop working after two months January 15, 2019
Reviewer: Carl Hewitt from Hamilton, ON Canada  
The gloves were great initially. My wife has arthritis in her hands and her hands are always cold and sore in the winter. The gloves helped a lot but after two months the heat in the fingers stopped working and the other glove was starting to go as well.
They have a 1 yr warranty but concerned they wont last.

Was this review helpful to you?

  1 of 1 people found this review helpful:
 
Quality construction December 8, 2018
Reviewer: Impact from Vernon, BC Canada  
My wife is on her 5th winter of downhill skiing ~50x/season. She loves these when working race courses (static for long periods).   She doesn't use the extension cables.  The batteries last all day in the wrist pocket.  ~ 200 charge cycles on the battery packs.

The cable makes an abrupt 180deg bend and takes constant motion, but hasn't failed there yet.  Very good quality construction on the battery packs and the glove itself.

One 12v 2600mAh battery pack has died after 4 years, so I thought I'd rebuild the Li-Ion pack myself.  The packs are the best built that I've seen in 30 years of rebuilding various battery packs. Excellent multiwraps, isolators and foam wrapping.

It turns out the battery cells are fine (larger size A cells). However the circuit board has failed.  The wires & soldered connections are fine, it's somewhere on the board circuits or one of the chips.  

We'll buy another set of batteries to keep these gloves going, since they're in great shape.

Was this review helpful to you?

  1 of 1 people found this review helpful:
 
AMAZING GLOVES! July 14, 2018
Reviewer: Lisa Andrews from Edmonton, AB Canada  
I rode my Spyder through the Icefields parkway a few weeks ago, the temps were a mere 10c and snowing at the top of the mountain. I would of never made it through the parkway without these gloves. They were a Godsend. They lasted a long time and I hadn't charged the gloves in months! My friends complain that with their heated grips, the back of their hand are cold, My hands were so warm,  all over!! Cant wait to buy the Heated Vest!!  Best purchase ever for my Spyder!!

Was this review helpful to you?

  1 of 1 people found this review helpful:
 
Heated Gloves that works! February 19, 2018
Reviewer: Claude Lalonde from Rawdon, QC Canada  
I bought two Motion Heat complete sets of glove liners, they worked so  well that I am returning for two heated vests. Can't wait for the socks!
Claude Lalonde.

Was this review helpful to you?

  1 of 1 people found this review helpful:
 
You get what you pay for! January 22, 2018
Reviewer: Mark A. from USA  
I am updating my previous review.  I really love these gloves but I had given a poor rating because of a major design flaw in the earlier versions of its battery packs that would cause the gloves to stop working altogether.  I was forced to purchase one updated battery pack last year to replace one of the defective units.  When my other battery pack finally stopped working, I decided not to spend another $60 for yet another battery so instead, I bought 2 different pairs of heated gloves from Amazon.  I was a little skeptical because each set cost slightly more than what I would have paid here for a single battery pack.  After trying them out, I was quickly reminded that you get what you pay for.  Neither set of gloves performed anywhere close to my Power in Motion glove liners especially in the fingers where you need the heat the most.  So I reached out to customer service and they helped me out to get my old gloves working again.

Was this review helpful to you?

View All Customer Reviews